Wave Attenuation Device Specifications

WaveEater attenuation Model 3636 is molded from Linear Low Density Polyethylene. Molded into it's core is a High Density 50% recycled Polyethylene 2" (5cm) ID tube which provides a bearing surface for the cable. The units are fitted with a 2" (5cm) threaded fill hole and come with a PVC plug. There is also the option of a 3/4" (1.9cm) drain plug if seasonal removal is required. When filled 2/3 with water, approximate suspended weight is 500lbs (220kg).

WaveEater attenuation model 1224 is molded in the same manner as the 3636, but has no tube through the core. The ID is 5/8" (1.6cm) and comes with a 3/4" (1.9cm) fill hole and nylon threaded plug. When filled 2/3 with water, approximate suspended weight is 56lbs (25kg).

Note: Water buoyancy reduces suspended weight by approximately 40%.


Standard Colors - Safety Orange and White

pantone colors for wave attenuators

Basic Pantone Colors

PANTONE Basic Yellow Marker Buoys PANTONE Yellow 012 C Marker Muoys PANTONE 554 C Marker Buoys PANTONE 581 C Marker Buoys PANTONE 200 C Marker Buoys
Basic Yellow
Yellow 012 C
554 C
581 C
PANTONE 279 C Marker Buoys PANTONE 2728 C Marker Buoys PANTONE 497 C Marker Buoys PANTONE 4675 C Marker Buoys PANTONE 3 C Marker Buoys
279 C
2728 C
497 C
4675 C
3 C

Custom Wave Attenuator Pantone Colors

Upon request for customization, WaveEater can match to practically any color. Please refer to the downloadable PDF for custom colors.